READ ENTIRE LABEL BEFORE APPLYING
Rust-Oleum 2X Ultra Cover Spray Paint delivers twice the coverage in a variety of colours and finishes. It can be used on plastic, metal, wicker and more. Before you begin, gather your supplies:
Painter’s tape
Sandpaper
Drop sheets
A lint-free cloth
Rust-Oleum 2X Ultra Cover Spray Paint (your chosen colour/finish)
If you are spray painting a wooden item, use sandpaper to remove any loose paint or flaking finish first. Whatever you are painting, make sure the surface is clean and dry before you start. Lay down a drop sheet to protect surrounding areas and work in a well-ventilated space.
Shake the can thoroughly. Hold the can about 25 to 40 cm from the surface and apply light coats using a steady, back-and-forth motion, slightly overlapping each pass.
2X Ultra Cover is touch dry in under 20 minutes (depending on conditions). For best results, apply additional coats within 1 hour or after 48 hours, then allow the final coat to dry for 24 hours. Always follow the directions on the label.
Learn more about Rust-Oleum 2X Ultra Cover Spray Paint: Rust-Oleum 2X Ultra Cover Spray Paint
Find more Rust-Oleum products: https://rustoleum.com.au/